NMEA2000® Deck Gauge
Part Number: 5250-F, 5250-W
INSTALLATION AND OPERATING INSTRUCTIONS
5250 Deck Gauge
NMEA2000®
Network Backbone
3271 Fuel Sender/
3281 Water Sender
The information in this document corresponds to software revision V1.00
INTRODUCTION
The 5250-F and 5250-W Deck Gauges are designed to display the contents of the tank at deck level near the tank
filler to avoid over filling and spillages.
The unit has a 3 character blue digital LED display that shows the tank level as a percentage from 0 – 100%. Inbuilt
light sensor adjusts the brightness of the display to be fully and easily readable in direct sunlight, as well as
dimmed at night to preserve night vision.
The 5250 is designed to be used on EITHER NMEA2000® networks or to be voltage driven by PLC based systems.
NMEA2000® network example
Statements made by any person, including representatives of Oceanic Systems, which are inconsistent or in
conflict with the terms of this Limited Warranty, shall not be binding upon Oceanic Systems unless reduced to
writing and approved by an officer of Oceanic Systems.
IN NO CASE WILL OCEANIC SYSTEMS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, DAMAGES FOR
LOSS OF USE, LOSS OF ANTICIPATED PROFITS OR SAVINGS, OR ANY OTHER LOSS INCURRED BECAUSE OF
INTERRUPTION OF SERVICE. IN NO EVENT SHALL OCEANIC SYSTEMS AGGREGATE LIABILITY EXCEED THE PURCHASE
PRICE OF THE PRODUCT(S) INVOLVED. OCEANIC SYSTEMS SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR
LIABILITIES, WHETHER ARISING OUT OF BREACH OF CONTRACT OR WARRANTY, TORT (INCLUDING NEGLIGENCE), OR
OTHER THEORIES OF LAW WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY OFFSHORE DYNAMICS, OR
ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.
Oceanic Systems does not warrant that the functions contained in any software programs or products will meet
purchaser’s requirements or that the operation of the software programs or products will be uninterrupted or
error free. Purchaser assumes responsibility for the selection of the software programs or products to achieve
the intended results, and for the installation, use and results obtained from said programs or products.
No specifications, samples, descriptions, or illustrations provided by Oceanic Systems to Purchaser, whether
directly, in trade literature, brochures or other documentation shall be construed as warranties of any kind,
and any failure to conform to such specifications, samples, descriptions, or illustrations shall not constitute
any breach of Oceanic Systems limited warranty.
WARRANTY RETURN PROCEDURE
To apply for warranty claims, contact Oceanic Systems or one of its dealers to describe the problem and
determine the appropriate course of action. If a return is necessary, place the product in its original packaging
together with proof of purchase and send to an Authorized Oceanic Systems Service Location. You are responsible
for all shipping and insurance charges. Oceanic Systems will return the replaced or repaired product with
shipping prepaid except for requests requiring expedited shipping (i.e. overnight shipments). Failure to follow
this warranty return procedure could result in the product’s warranty becoming null and void. Oceanic Systems
reserves the right to modify or replace, at its sole discretion, without prior notification, the warranty listed
above.
Copyright © 2019 Oceanic Systems (UK) Ltd. All rights reserved. Our policy is one of continuous product improvement so product
specifications are subject to change without notice. Oceanic Systems products are designed to be accurate and reliable. However,
they should be used only as aids to vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring
techniques. NMEA2000® is a registered trademark of the National Marine Electronics Association.
Oceanic Systems (UK) Ltd
Unit 10 -11 Milton Business Centre, Wick Drive,
New Milton, Hampshire, BH25 6RH, United Kingdom
Tel (UK): +44(0)1425 610022 Tel (USA): (844)898 6462
Fax: +44(0)1425 614794 Email: [email protected]
Web: www.osukl.com
1 of 4
4 of 4
