Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 97 / 349

6-7
Chapter 6 Admit/Discharge EMR Link Function
 [Discharge and admit as new patient.] : Initializes the current patient data/monitoring condition and admit the
searched patient as new patient.
 [Cancel] : Cancels the acquired information.
To Change the Admit Date
The admit date/time can be changed when a data server is used through the TCP/IP network or when EMR link
function is used with the patient data server.
NOTE
 To change the admit date/time, it is necessary to perform network setup for the data server
and the patient data server in advance. (

Maintenance Manual "TCP/IP Network" P2-19)
1
Press the key for "Admit Date/Time" on the "Admit/Discharge" menu.
 The "Admit Date/Time" window will be displayed.
2
Enter the year, month, day, hour, and minute. It is not possible to set a future
date/time.
1
Enter the numeric where blue cursor is displayed.
Enter the year, month, day, hour, and minute using the numeric keys.
2
Press the [Set] key.
 The entered numbers will be finalized.
EMR Link Function
Using the EMR link function through the patient data server allows to perform the following operation.
 When a patient is admitted on EMR, the same patient will be admitted on the DS-8900 system.
 When a patient is discharged on EMR, this patient's information on the DS-8900 system will be initialized and
allows discharge operation.
 When a patient information is changed on the EMR, the patient information on the DS-8900 system will also
change.
CAUTION
 If there are items not transmitted from the EMR, change those manually on the "Admit/
Discharge" menu. Make sure that the pacemaker usage and patient classification are
properly set as these will affect the monitoring accuracy.

The discharge process on EMR will initialize the patient information and monitoring data,
but will not initialize the alarm settings on the central monitor. To initialize these data, it is
necessary to perform discharge process on the central monitor.
NOTE
 To use the EMR link function, it is necessary to select [Link with EMR] on the "Network
Configuration (Patient Data Server)".
(

Maintenance Manual "Patient Data Server" P2-24)