manualshive.com logo in svg

Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 228 / 349

Share
Download
Fukuda DYASCOPE 8000 Series Operation Manual Download Page 228

12-16

Chapter 12  Printing

Laser Printer Operation

Laser Printer Operation

Status Message

The laser printer status will be indicated with the following messages.

Stacked Data

Maximum of 64 data can be stacked for printing.
On the laser printer status message display area, total number of stacked data for all beds will be displayed.
When the total stacked data for all beds reaches 64, printing will be disabled for additional data.

To Delete the Stacked Data

1

Press the [Cancel Printing] key while printing.

All stacked data will be deleted.

      NOTE

Pressing the [Print] key on each review data screen will not stop the printing. It will 
stack a new data instead.

Displayed Message

Details

(Numeric Value)

Quantity of stacked data is displayed. Maximum of 64 data can be stacked.

(Printing Status Icon)

Printing status is displayed. The status bar indicates 0%, 25%, 50%, 75%, 100%.

LP Com Error

Indicates communication error with the laser printer.

LP Waiting

Indicates that the printer is waiting for printing.

Cancel Printing 

Pressing this key will delete all stacked data.

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Reviews:

No comments