Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 232 / 349

13-2
Chapter 13 Menu Items General Description of the Setup Menu
Function:
All Beds Alarm The alarm settings for all beds can be verified in a list format.
Bed Transfer The patient information and monitoring data can be transferred/exchanged between beds.
Network View The waveform and numeric data of the bedside monitor monitored on other central monitor will be displayed.
Night Mode The night mode for the DS-LAN III network bed and TCON bed can be turned ON from this equipment.
Nurse Call
Daily Inspection Daily check of the nurse call system can be performed. The key for this function will be displayed only when
[Nurse Call] is assigned to "Main Unit Port" for serial communication. (Initial Settings > External Devices >
Serial Comm.) (

"Nurse Call Daily Check" P5-5)
Discharged List The list of 160 discharged patients can be displayed. Whether or not to display the review data can be set.
All Beds Events The alarm events for all beds can be verified on one display.
All Beds Nurse Call The nurse call setup list for all monitoring beds will be displayed and the settings can be changed.
Each Bed: Settings can be performed for each bed.
Printing Settings for printing the data to the recorder unit or laser printer can be performed.
(

"Printing Condition/Output Destination Setup" P12-2)
Color The colors of waveforms and numeric data can be set.
Nurse Call ON/OFF of nurse call system, nurse call factor, alarm duration before notification can be set.The key for this
function will be displayed only when [Nurse Call] is assigned to "Main Unit Port" for serial communication.
(Initial Settings > External Devices > Serial Comm.)
Full Disclosure
Waveform The parameters to save as full disclosure waveform can be set.
(

"To Select the Waveform to Store" P10-7)
Data Server
Output Waveform The waveforms to output to the data server can be set. The key for this function will be displayed only when
[ON] is set for "Data Server" on the network setup. (Initial Settings > External Devices > Network)
Parameter ON/OFF Whether or not to monitor can be set for each parameter.
(

"Parameter ON/OFF" P8-25)
Common Setup: Settings common to all beds can be performed.
Display
Configuration The display configuration such as waveform sweep speed can be set.
Tone/Volume The volume and tone of the alarm sound, HR synchronized sound, key sound, boot/shutdown sound can
be set.
Brightness The brightness of the display can be set.
Monitor Suspend The messages and colors to be displayed when monitoring is suspended can be set.
Nurse Team The colors and name of the nurse team can be set to identify the nurse team for each patient.