Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 130 / 349

7-20
Chapter 7 Alarm Function All Beds Alarm Events
6
The display will switch by page.
7
The displaying time span can be selected from 20min., 1hr, 2hrs, 4hrs, 8hrs, 12hrs, 16hrs, 24hrs.
3
The beds to be displayed can be filtered.
 [This Display]: The beds monitored on the display unit currently displaying the alarm events for all beds will
be displayed.
 [Other Display]: The beds monitored on other display unit will be displayed.
 [Nurse Team]: The beds registered for the selected nurse team will be displayed.
4
Select the event group to be displayed. The display color and
group name can be changed.
1
Select the group to be changed.
2
Press the [Change Event] key to display the event
selection screen. (shown on right)
3
Use the / keys to switch the page.
Select the events to be displayed for each line.
4
Maximum of 4 parameters per line can be selected.
5
Select the display color for the selected events from 12
colors.
6
Press the [Change Name] key to change the event group
name.
5
Select the event to be displayed on the event list.
1
Select the number of item to be displayed
from 1 to 32. Use the
/ keys to switch
the display.
2
Select the alarm event to display.
Use the
/ keys to switch the arrhythmia
alarm events.
3
Press [Add] to add the selected event to the
selected position.
The event on No. 32 will be deleted.
4
Press [Delete] to delete the selected event.
The events will shift upwards.
6
The currently displayed data will be printed on the laser printer.
NOTE

If a laser printer is not connected, [Print] key will not function.
7
Use the / keys to change the displaying beds.
8
Displays the full disclosure waveform.
 Press [Full Disc. Wave] for each bed to display the full disclosure waveform at the cursor position.
2
6
1
3
4
5
3
4
1
2