Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 74 / 349

4-4
Chapter 4 Basic Operation Operation on the Home Display/Individual Bed Display
Operation on the Home Display/Individual Bed Display
Various operation can be performed using the touch panel.
This section describes the touch panel operation on the home display and individual bed display.
To Change the Quantity of Displayed Numeric Data
The quantity of displayed numeric data can be changed.
REFERENCE
 It is necessary to assign [Numeric Data Quantity] key as user key in advance.
(

Maintenance Manual "User Key" P7-20)

The quantity of numeric data can be also changed on the "Display Config." menu.
(

"Numeric Data/Waveform" P13-30
 It will not function during individual bed display.
 It will not function when the home display layout with center split is set.
1
Press the [Numeric Data Quantity] key preassigned as user key.
 Pressing this key will sequentially change the quantity of displayed numeric data.
To Enlarge/Reduce the Numeric Data Box Size
The numeric data box size can be enlarged/reduced without changing the area size of all numeric data.
REFERENCE
 It is necessary to assign [Zoom Numeric Data] key as user key in advance.
 Depending on the setting, enlarging/reducing the numeric data box size can be either
applied to all beds or to individual bed. (

"Numeric Data Box Size" P13-29)
 It will not function during individual bed display.
 It will function only when the display height for all beds are equal.
1
Press the [Zoom Numeric Data] key preassigned as user key.

The numeric data box size will enlarge/reduce. The size of the whole numeric data display area will not
change.
 Pressing the [Zoom Numeric Data] key will sequentially enlarge/reduce the numeric data box size.

If the numeric data box size is enlarged, the quantity of displayed numeric data will decrease.