Home
/
Fukuda
/
DYASCOPE 8000 Series
/
Operation Manual

Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 118 / 349

Share

Page: 118 / 349

Fukuda DYASCOPE 8000 Series Operation Manual Download Page 118

7-8

Chapter 7 Alarm Function

Alarm Limit Setup



Pressing the key while arrhythmia learning is in process will not stop the process.

Procedure from the Central Monitor User Key:

1

Press the [Arrhythmia Relearn] key on the central monitor user key area.



[Arrhythmia Relearn] will be displayed on the all beds display area.

2

Press the [Arrhythmia Relearn] key on the all beds display area.



Arrhythmia learning for that bed will start.



During arrhythmia learning, a message will be displayed.



When the learn process is completed, the message will disappear.

3

To clear the [Arrhythmia Relearn] key for the bed which arrhythmia learning was not performed, press again
the [Arrhythmia Relearn] key on the central monitor user key area.



Asystole, VF, VT Alarm

To not miss any life-threatening alarm, Asystole, VF, VT alarm cannot be turned OFF.

List of Alarm Settings

The alarm settings can be verified in list format. The alarm settings for each parameter can be changed on this list.

1

Press the [Menu], [List] ("Alarm") key on the individual bed display.



The alarm settings list will be displayed.

2

Select from [All List] / [Meas. List].



[All List]: The settings for all the parameters will be displayed.



[Meas. List]: The settings for only the measured parameters will be displayed.

:

Indicates the alarm printing is set for the parameter.

:

Indicates the parameter is set as recall factor.

:

Indicates the alarm is OFF.

3

2

«
...
116
117
118
119
120
...
»

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Reviews:

No comments