Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 102 / 349

6-12
Chapter 6 Admit/Discharge Data Transfer Function
6
By selecting [ON] for "Data Transfer" under data server setup, the data will be transferred to the data server
after the data is uploaded to the central monitor. While the data is transmitted to the data server, <Transmitting
Data> will be displayed on the central monitor.
 If the transmission to the data server fails, <Chk Data Transfer> will be displayed. The message can be
cleared by pressing the [Individual Alarm Silence] key on the individual bed display.
When the Patient is Transferring to Other Bed (When EMR Link Function is Used)
When the EMR link function is used, it is necessary to perform admit/discharge process through the EMR.

When Leaving the Original Bed
1
Disconnect the transport monitor from the host monitor.
2
The monitor suspend confirmation window will be displayed on the host monitor.
3
Select [Monitor Suspend].
4
Discharge the patient through the EMR.
CAUTION
 Make sure to perform the discharge process after the transport monitor is disconnected.
Otherwise, the patient information on the transport monitor will be cleared.

When Transferred to the New Bed
1
If the previous patient information remains on the host monitor, discharge the patient through the EMR.
2
Connect the transport monitor to the host monitor.
3
The review data while transferring will be uploaded to the central monitor.
4
Admit the patient through the EMR.
CAUTION

Make sure to discharge the previous patient from the host monitor before connecting the
transport monitor. Otherwise, the data of the previous and current patients may mix up.