Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 75 / 349

4-5
Chapter 4 Basic Operation Operation on the Home Display/Individual Bed Display
 If the numeric data box size is reduced, the quantity of displayed numeric data will increase.
 When [Each Bed] is set for "Zoom Numeric Data", the numeric data box size for only the selected bed will
be enlarged/reduced.
Optimizing the Displayed Beds on the Home Display
The displayed number of beds on the home display can be optimized.
REFERENCE
 It is necessary to assign [Optimize Display] key as user key in advance.
(

Maintenance Manual "User Key" P7-20)
 It is necessary to set [ON] for "Optimize Displayed Beds" under [Initial Settings>User I/
F>Display Print] in advance.
(

Maintenance Manual "Display/Print" P7-12)
1
Press the [Optimize Display] key preassigned as user key.
 The beds discharged when [Suspend] is set for "Setup at Discharge" will not be displayed, and the display
area for the monitored beds will be enlarged to optimize the home display.
NOTE
 When [ON] is set for "Optimize Displayed Beds", PC communication function cannot be
used.
 The beds which will not be displayed when optimizing the display are the discharged beds
when [Suspend] is set for "Setup at Discharge" under [Initial Settings>User I/F>Display
Print].
Short Cut Keys Display
Pressing the patient information area will
display 12 short cut keys for each bed.
Pressing one of the keys will display the
corresponding menu.
The short cut key display will close for the following cases.
 When the short cut key is pressed.
 When operation was not performed for 1 minute.
 When the patient information area was pressed again.
 When other key such as user key, other patient information area, etc. was pressed.
Enlarged Numeric Data Box
Reduced Numeric Data Box