manualshive.com logo in svg

Fukuda DYASCOPE 8000 Series, Operation Manual

Share
Download
Fukuda DYASCOPE 8000 Series Operation Manual Download Page 101

6-11

Chapter 6  Admit/Discharge

Data Transfer Function

When Returning to the Bed

1

Connect the transport monitor to the host monitor.

2

The review data while transferring will be automatically 
uploaded to the central monitor.

While uploading the data, <Uploading> will be displayed on 
the central monitor.

3

By selecting [ON] for "Data Transfer" under data server setup, 
the data will be transferred to the data server after the data is 
uploaded to the central monitor.While the data is transmitted to 
the data server,  <Transmitting Data> will be displayed on the 
central monitor. 

When the Patient is Transferring to Other Bed

When Leaving the Original Bed

1

Disconnect the transport monitor from the host monitor.

2

The monitor suspend confirmation window will be displayed on the host monitor.

3

Press the [Discharge] key.

When Transferred to the New Bed

1

Connect the transport monitor to the host monitor.

2

The "Patient Selection" window will be displayed on the host monitor.

3

Select the patient of the transport monitor.

REFERENCE

When [Monitor Patient of This Equipment] is selected, the patient on the transport monitor 
will be discharged and the monitoring of the host monitor patient will start.

When [Monitor New Patient] is selected, both patients on the host monitor and the 
transport monitor will be discharged and the monitoring of new patient will start.

4

The patient of the host monitor will be discharged, and the monitoring of the transport monitor will start.

5

The review data while transferring will be uploaded to the central monitor.

While uploading the data, <Uploading> will be displayed on the central monitor.

If the transport monitor is disconnected during uploading, <Failed to upload.> will be displayed. The 
message can be cleared by pressing the [Individual Alarm Silence] key on the individual bed display.

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands