Fukuda DYASCOPE 8000 Series Operation Manual Download Page 60 | Manualshive

Page: 60 / 349

Fukuda DYASCOPE 8000 Series Operation Manual Download Page 60

3-4

Chapter 3 Description of the Display

Home Display and Individual Bed Display

Icons Displayed on Numeric Data Box



Control Keys, Central Monitor Information Area

The control keys are displayed. The central monitor information is also displayed.

Icon

Description

Alarm OFF
Indicates the alarm is OFF.

Message Icon (



Maintenance Manual "Display/Print" P7-12)

Indicates that an alarm message is present for that parameter. Whether or not to display this icon can
be selected on the Initial Settings.

HR/PR Synchronization Mark (

"Detail Setup" P8-6)

Flashes synchronizing to the heartbeat or pulse wave.

RR Synchronization Mark (

"Common Setup / Impedance Setup" P8-12)

Flashes synchronizing to the respiration.

Description

1

Central Monitor User Key (



Maintenance Manual "User Key" P7-20)

Preprogrammable user keys to control the central monitor display. The [Menu] key (Central Monitor Display) is fixed.

2

Central Monitor Minimize Key (

"To Minimize/Restore the Window" P4-7)

Maximum of 8 windows on the central monitor display can be minimized.
The minimized window list will be displayed in dropdown list format.

3

Recorder Unit Status Display Area (

"Message List" P14-1)

The status of HR-800 Recorder Unit (optional) such as <Recorder Busy>, <Check Recorder> will be displayed.

4

Laser Printer Status Display Area
The quantity of stacked data, printing progress, status message will be displayed.

5

TCON Mark Display Area
The TCON communication status will be displayed. On the TCON remote station, an icon indicating the signal strength of
the communication with the base station will be displayed. On the TCON base station, only the TCON group ID will be
displayed.

6

System Status Display Area
The system status message will be displayed. The displayed color will change depending on the status priority.

7

Clock (



Maintenance Manual "Time/Date" P7-31)

The current date/time, central ID will be displayed. If the time is displayed in yellow, it indicates that the time
synchronization with the server has failed.

1

2

3

4

7

6

5

«
...
58
59
60
61
62
...
»

Summary of Contents for DYASCOPE 8000 Series






























































































































































































































































































































































Reviews:

No comments