Fukuda DYASCOPE 8000 Series, Operation Manual

Page: 108 / 349

6-18
Chapter 6 Admit/Discharge Discharge
 When the discharge operation is performed on the bedside monitor, the settings will be
initialized according to the "Power ON/Discharge" setting on the bedside monitor.
REFERENCE

The monitoring condition after discharge can be selected from [Admit] or [Suspend] for
"Setup at Discharge" under [Menu] > "Initial Settings" > [Display/Print] ("User I/F").
(

Maintenance Manual "Display/Print" P7-12)
Discharging Procedure
CAUTION
 If monitoring of new patient is started without discharging the previous patient, the
measurement data of the previous and new patient will become mixed up on the recall and
trend data.
 When the discharge procedure is performed, patient data such as recall and trend will be
initialized. The parameter and alarm will be reset according to the settings made under
[Menu] > "Initial Settings" > [Admit] ("User I/F").
(

Maintenance Manual "Admit" P7-16)
1
Press the [Discharge] key on the "Admit/Discharge" screen.

The discharge confirmation window will be displayed.
 If [Cancel] is pressed, the discharge process will be canceled and the
confirmation window will close.
2
Press the [Discharge] key.

The patient data, patient information will be initialized.
 The alarm settings will be initialized to the settings made under [Menu] > "Initial Settings" > [Admit] ("User I/
F").