Fukuda DYASCOPE 8000 Series, Operation Manual, Page: 300 / 349

15-2
Chapter 15 Setup Item/Default Value Parameter Setup
Parameter Setup

ECG

RESP

SpO
2
Item Description Default
Setting at
Discharge
Lead I, II, III, aVR, aVL, aVF, V, V1 to V6 ECG1: II
ECG2: I
ECG3: III
ECG4: aVR
ECG5: aVL
ECG6: avF
ECG7: V1
ECG8: V2
ECG9: V3
ECG10: V4
ECG11: V5
ECG12: V6
Default
Waveform Size Auto, x1/4, x1/2, x1, x2, x4 ECG1 to ECG12: x1 Default
Filter (Display Only) Monitor, Diagnosis, ESIS Monitor No Change
Synchronized Mark/Tone ECG, SpO
2
, SpO
2
-2, BP ECG No Change
Pacemaker *Same with "Patient Admit/Discharge" section.
Pacemaker Pulse ON, OFF, Distinct Color Distinct Color No Change
Pace Pulse Mask Time Auto, 10ms, 20ms, 40ms, OFF Auto No Change
Drift Filter ON, OFF ON No Change
AC Filter ON, OFF ON No Change
Auto Lead ON, OFF OFF No Change
ST/VPC/Arrhy.
Alarm Display
ON, OFF ON No Change
Item Description Default
Setting at
Discharge
Waveform Size x1/4, x1/2, x1, x2, x4 x1 Default
RR Synchronized Mark ON, OFF ON No Change
RR/APNEA Alarm Source Auto, Impedance, Ventilator, CO
2
/GAS Auto No Change
CVA Detect ON, OFF OFF Default
Item Description Default
Setting at
Discharge
Waveform Size x1/4, x1/2, x1, x2, x4 x1 Default
Synchronized Mark/Tone *Same with selection for ECG Setup.