Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Page: 83 / 745

Cleaning the Machine
83
M
a
int
e
na
nc
e
3
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying, faxing, or scanning.
1
Wipe the narrow glass strip and the document
presser with a soft cloth moistened with water
to remove any dirt, and then wipe it with a soft,
dry cloth.
Important • Do not press the film with an excessive force
as it can be easily damaged.
• Do not use cleaning agents other than water
or neutral detergent.
Note • If dirt does not come off easily, gently wipe it
with a soft cloth moistened with a small
amount of neutral detergent.
2
Hold the handle to open the chute part of the
figure on the right. Wipe the narrow glass strip
with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft
dry cloth.
Important • Do not use cleaning agents other than water
or neutral detergent.
Note • If dirt does not come off easily, gently wipe it
with a soft cloth moistened with a small
amount of neutral detergent.
3
Push the center-left side of the document cover to close the belt area until it clicks into
place.
Cleaning the Document Feeder Rollers
If the document feeder rollers become soiled, smudges may appear on copies, faxes, or
scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or
coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying, faxing, scanning, or printing.
1
Lift the document feeder top cover until it is
completely open.
Note • When you fully open the cover, it enters a
fixed position. Open the cover gently.
Documentp
resser
Guide
Narow glass
strip
Chute
Narrow
glass strip