Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Page: 180 / 745

5 Tools
180
To
ols
5
„
Port Number
Enter a port number to use IP fax (SIP).
The default value is 5060.
Important • Do not use any numbers assigned to other ports.
Note • IP fax (SIP) is not available for some models.
FTP Client
„
Port Status
Select [Enabled] when you use the Scan to PC service with FTP transmission.
Note • Select a communication mode to send data scanned via FTP from [Passive Mode] and [Active
Mode]. [Passive Mode] is selected by factory default. You can change the setting from CentreWare
Internet Services.
Receive E-mail
„
Port Status
Select [Enabled] when you receive e-mails or Internet faxes.
Send E-mail
„
Port Status
Select [Enabled] when you send e-mails or Internet faxes.
E-mail Notification Service
„
Port Status
Select [Enabled] when you use the E-mail Notification Service. The E-mail Notification
Service notifies you of the machine status or the completion of a print job and a direct fax
job by e-mail.
Note • "Consumables Status", "Parts Status", "Paper Tray Status", "Output Tray Status", "Jam Status",
"Interlock Status", "Fault Notice", and "Billing Meter" can be notified as the machine status.
• You can configure the E-mail Notification Service in CentreWare Internet Services. For more
information, refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the Internet. The communication fee shall be borne by you.
UPnP Discovery
„
Port Status
Select [Enabled] to use UPnP.
„
Port Number
Enter a port number for UPnP communication from 1 to 65535.
The default value is 80.
Important • Do not use a number that is the same as a port number of another port. However, you can use the
same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP,
WebDAV, and Web Services on Devices (WSD)).
WSD
Note • WSD stands for Web Services on Devices.