Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Page: 623 / 745

Optional Components
623
A
ppe
n
d
ix
16
Optional Components
The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Product Name Description
HCF (A4 1 Tray) Allows you to load 2000 sheets of papers (when using 80 gsm
paper) in tray.
HCF (A4 2 Tray) Allows you to load 2000 × 2 sheets of papers (when using 80 gsm
paper) into the Tray 6 and 7.
Simple Catch Tray This unit allows to eject paper.
Offset Catch Tray This unit allows to eject paper with an offset.
D2 Finisher Staples and hole-punches output sheets.
Inserter is installed for loading paper to be used as separators and
covers.
US 2/3 Hole Punch Kit for D2
Finisher 2/3 hole-punches output sheets.
Note • This kit is available only when the D2 Finisher or D2 Finisher
with Booklet Maker is installed.
D2-Staple-Finisher with
Booklet Maker Staples or hole-punches output. It also folds output in half or
staples folded output.
Inserter is installed for loading paper to be used as separators and
covers.
D2-Folder Unit This unit allows to fold in z-folded or tri-folded output.
C3 Finisher Staples and hole-punches output sheets.
C3 Finisher with Booklet
Maker Staples or hole-punches output sheets. Also folds output sheets in
half or staples them.
Punch Unit 2/4H CD1 2/4 hole-punches output sheets.
Note •
C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit 2/4H CD1 is included when you purchase the C3
Finisher or C3 Finisher with Booklet Maker.
Punch Unit US 2/3H CD1 2/3 hole-punches output sheets.
Note • C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit US 2/3H CD1 is included when you purchase the
C3 Finisher or C3 Finisher with Booklet Maker.
Folder Unit CD1 Folds output sheets in bi-folded or tri-folded.
C3 Finisher Staple Unit 65
Sheets Staples output sheets. Up to 65 sheets can be stapled depending
on the type of paper.
Bypass Tray Kit An bypass tray that can load 250 sheets of papers.
Note • This kit is available only when the HCF (A4 2 Tray) is installed.
Wing Table A kit to load the related equipment such as IC Card Reader, or to
secure work space.
You can set the table either on the right or left side of the
document feeder depending on the related equipment.
Wing Table 2 A kit for an embedded IC Card Reader.
Attention Light II Allows you to know the machine trouble or the completion of copy
or incoming fax jobs, even when the machine is distant from you.
Printer Kit
*1 Adds the Print feature to the machine.