Fuji Xerox ApeosPort-V 6080 Administrator'S Manual Download

Page: 483 / 745

Error Code

483

Pro

lem

So
lv

018-568

[Cause]

An SSL/TLS connection error occurred.

[Remedy] Check the followings:

The destination HTTP server for the scanned document is accessible by PC.

SSL settings for the HTTP server is correct.

The HTTP server name

The HTTP server path name

018-569

[Cause]

The SSL server certificate may have a problem.

[Remedy] 1)Check whether the destination HTTP server for the scanned document is accessible by

PC.

2)Check whether the SSL server certificate is registered on the HTTP server.
3)Check whether the SSL server certificate is valid.

Check the followings:

- the certificate is unexpired
- the time set on the machine is correct
- the certificate is not on the discard list

4)Check the certificate path to the SSL server certificate, and import the required CA

certificate.

5)If the SSL server certificated is not registered on the HTTP server, disable the [Verify

Remote Server Certificate] setting.

018-570

[Cause]

A client certificate authentication error occurred on the HTTP server.

[Remedy] Check the followings:

The destination HTTP server for the scanned document is accessible by PC.

The SSL client certificate is registered on the machine.

The device certificate is correctly registered on the HTTP server.

018-571

[Cause]

An internal error occurred.

[Remedy] Perform the same operation again. If the problem persists, contact our Customer

Support Center.

018-572

[Cause]

The specified context name contains invalid characters.

[Remedy] Check whether the specified context name is correct.

018-573

[Cause]

The specified connection name contains invalid characters.

[Remedy] Check whether the specified connection name is correct.

018-574

[Cause]

The specified volume name contains invalid characters.

[Remedy] Check whether the specified volume name is correct.

018-575

[Cause]

The specified user name or password contains invalid characters.

[Remedy] Check whether the specified user name or password is correct.

018-576

[Cause]

The specified path name contains invalid characters.

[Remedy] Check whether the specified path name is correct.

018-577

[Cause]

The specified file name contains invalid characters.

[Remedy] Check whether the specified file name is correct.

018-578

[Cause]

The specified server or tree name does not exist.

[Remedy] Check the followings:

The network cable connection on the machine

The NetWare server is accessible by PC

The NetWare server or tree name

Run DSREPAIR at the server console on the NetWare server.

Error Code

Cause and Remedy

Summary of Contents for ApeosPort-V 6080









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-V 6080

Reviews:

Related manuals for ApeosPort-V 6080

Brands by name

Popular brands

Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Search results

Summary of Contents for ApeosPort-V 6080

Reviews:

Related manuals for ApeosPort-V 6080

Brands by name

Popular brands