Foma P702i, Manual

Page: 328 / 478

325
Other Useful
Functio
ns
Multit
ask
The FOMA phone supports “Multitask” that enables you
to use multiple functions at the same time such as menu
functions (see page 34).
By combining Multiaccess and Multitask, you can use
following functions simultaneously (see page 389 for
the combination patterns of Multitask):
You can use maximum three functions and a voice or
video-phone call simultaneously.
Mail Group . . . . . i-mode mail and SMS functions
i-mode Group. . . menu functions inside “i-mode group” on the Main
menu
Setting Group . . menu functions inside “Setting group” on the Main
menu
Tool Group . . . . . menu functions inside “Tool group” on the Main
menu
Other functions not in the groups
. . . . . . . . . . . . . . Voice call, video-phone call, 64K data
communication, etc.
1
When a function is running
2
Start another function.
Multitask
Multitask
< >
■ During Multitask
When “Menu icon” of “Menu display set” is set
to “Pattern 1” to “Pattern 3”, the “
” or “ ”
mark is added to the icon of the group that is
being used. When set to “Pattern 4” or
“Customize”, the group appears framed.
Start Another Function
i-mode Group
Tool Group
Mail Group
Setting Group
When a function in the
Tool group is running
When multiple functions are working, you can switch
the displays by pressing and holding
for at least
one second. The display switches from the latest one in
descending order.
■ To check usage status of functions
To use icons
“ ” . . . Displayed when a single function is used.
“ ” . . . Displayed when multiple functions are used.
To use TASK MENU
Press .
The menu list in use is displayed.
You can also switch menus by using
to
select a menu and pressing .
■ When you call up a menu function
If another menu function in the same group has already been called up,
the confirmation display appears asking whether to switch the function.
Select “YES” to close the current menu function and the new menu
function will be called up.
If you try to start up another function when three functions have already
been started up, “Function cannot operate any more” is displayed.
Information
p
When the Stand-by display is displayed, you can press to access
the i-mode menu and to access the Mail menu.
p You are charged call fee even when you are running other functions
during a call.
p If a call comes in while another function is working, the call might not be
received correctly. In that case, “Record message” or “Call Forwarding
Service” may start in a shorter time than the ring time specified for
them.
p Multitask is not available to transfer data to and from the UIM, miniSD
memory card, another FOMA phone, and a personal computer. To
access the data transfer function, make sure that you close other menu
functions.
p If you use Multitask to switch functions while executing another function
whose load of processing is high, delay may occur in displaying
operation, and so on.
Switch Displays
Setting Group Tool Group Stand-by display
For at
least
one
second
For at least one second
For at
least
one
second