Foma P702i, Manual

Page: 451 / 478

13
5
Enter an access point name.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名 (Access point name)” field.
p You cannot enter the following half-pitch symbols:
¥, /, :,
_
, ?, !, <, >, |, and ”.
p In the “ 接続先 (APN) の選択 [Select an access point name (APN)]”
field, “mopera.ne.jp” is displayed as the default. Go to the “ 接続先
(APN)
設定
[Set an access point name (APN)]” screen.
6
Click “
接続先
(APN)
設定
[Set an access point
name (APN)]”.
“mopera.ne.jp” is registered in “cid1” and “mopera.net” is registered
in “cid3” at purchase. Click “
追加
(Add)”, then enter the correct
access point name (APN) for FOMA packet communication on the
“
接続先 (APN) の追加 [Add an access point name (APN)]” screen.
Click “OK”.
p For a provider access point name (APN), contact the relevant
provider.
p The “ パケット通信設定 (Packet communication setting)” screen
returns. Select an access point name (APN) you specified newly. If
it is good, click “OK”.
7
Click “ 詳細情報の設定 (Set detailed
information)”.
The screen for specifying “
IPアドレス
(IP address)” and “
ネーム
サーバ ー (name server)” appears. When entering dial-up
information for the provider you have subscribed or Intranet LAN
system, specify addresses according to the entry instruction
messages, then click “OK”.
8
Click “
次へ
(Next)”.
9
Specify “ ユーザー名 (User name)” and “ パス
ワ ード (Password)”, then click “ 次へ (Next)”.
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.
p
For Windows
®
XP and Windows
®
2000 Professional, select the
user name as you like.
For Windows
®
Me and Windows
®
98, the display for selecting
users that are usable does not appear.
10
Select “
最適化を行う
(Optimize)”, then click
“
次へ
(Next)”.
Confirm that “ 最適化を行う (Optimize)” is checked, then click “ 次へ (Next)”.
p If optimized, the confirmation display to optimize does not appear.
11
Confirm the set information, then click “
完了
(Complete)”.
The set contents are listed on the screen. Confirm that there is no
problem on the set contents, then click “
完了
(Complete)”.
p To change the set contents, click “ 戻る (Back)”.
p If “ デスクトップにダイアルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
For Windows
®
98 and Windows
®
Me
For Windows
®
XP and Windows
®
2000 Professional