Foma P702i, Manual

Page: 418 / 478

415
A
ppendix/
External Devi
ce
L
inkage/Tro
ubleshooti
ng
Softw
are Update
When downloading takes time or the server is busy, you can set in advance the date and time for starting
up the software update by communicating with the server.
1
Select “Reserve” from the
Software Update display.
The date and time which can be reserved
are displayed
p
The server’s time table appears for the
software update reservation.
When you select “Others”
After communicating with the server, you can select the date and time you want. The availability of each time zone is displayed
on the time selection display.
○ : Available, △ : Almost full, × : Not available
When you select one time zone you want, you can communicate with the server again to display candidates for reserving time.
2
Confirm the date and time
you selected. Select
“YES”. Your FOMA phone
communicates with the
server again and then the
reservation is completed.
When the reserved time comes, the display on the right appears and the software update starts
automatically.
Before the reserved time, charge the battery pack full, place the FOMA phone in the Stand-by display in
a place within reach of radio wave. Note that updating may not start even when the reserved time has
arrived if you are using other functions.
p During a call, Lock All, or PIM Lock, the message to the effect that the software update starts is not
displayed and the software update does not launch. Follow step 1 on page 413 to display the reason
for the failure to launch the software update.
Select “Software update” from the setting menu and enter your Terminal Security
Code; then you can confirm the reserved time.
You can change or cancel the reserved date and time from the display for checking reservation. To change, select
“Change”. To cancel, select “Cancel”.
If you select “NO” or “Cancel” from each display, the display for ending the operation appears.
Select “YES”; then the software update is completed and the Stand-by display returns. To return to the previous display, select “NO”.
Reserve Date and Time for Updating Software (Reserve Update)
Information
p
The software update may not start if an alarm is activated.
p
The software update do not start during receiving i-mode mail, SMS messages, or Message R/F. The receiving continues and displays
“Notification icon” on the Stand-by display.
p If you execute “Initialize” after completing the reservation (see page 340), the software update does not start even when the reserved
time arrives. Make a reservation for the software update again.
Checking reservation
Ending software update
Information
p If the battery level points “ ” during operation, the software download or rewriting is not done and the operation is finished.