Foma P702i, Manual

Page: 96 / 478

93
Making/
Receivi
ng Vid
e
o-ph
one Call
s
Vo
ice Call
Auto
Re
d
ial
You can set the image to be sent to the other party for making a video-phone call.
1
Enter a phone number,
or bring up the detailed display of a Phonebook entry, redial item, dialed call record,
or received call record.
2
( ) Select image Me or Chara-den
p The setting is completed when you select “Me”.
p To cancel the setting by call, select “Terminate (Release)”. The setting is completed.
3
Select a Chara-den image
If a video-phone call cannot be connected, it will be automatically redialed as a voice call.
1
Videophone Voice call auto redial ON or OFF
You can let the other party know that your FOMA phone can switch between a voice call and video-phone
call. This function is set to “Indication ON” at the time of contract. When “Notify switchable mode” is set
to “Indication ON”, the caller can switch between the video-phone call and voice call.
p You cannot operate “Notify switchable mode” when you are out of the service area or radio waves do not reach, or during a call.
1
Videophone Notify switchable mode Do the following operations.
Set by Call
Information
p The priority order for images to be sent to the other party is; “Setting by call” → “Send camera image”.
p
The setting applies just for the one call (dial-out). The settings for “Send camera image” and “Select image” do not change.
Further, the setting is not stored in Redial/Dialed Calls.
p The setting will be canceled if you make a voice call after setting “Select image”.
Voice Call Auto Redial
Redialing as a Voice Call when a Video-phone Call cannot be Connected
Setting at purchase OFF
< >
Information
p The charges for calls once switched to voice calls are billed at the rates for the voice calls.
p Once the dialed video-phone is connected, the dialing operation for a voice call cannot be done.
p “Voice call auto redial” cannot be done when the dialed video-phone is a non-existent number, busy, out of the service area, off, set to
be rejected because of no caller ID, or in Public Mode (Drive Mode).
p
When “Voice call auto redial” has been operated, only the last call is stored in Dialed Calls.
Notify Switchable Mode
Setting for Switching between a Voice Call and a Video-phone Call
< >
Item Operations
Indication ON YES OK
Indication OFF YES OK
Check indication You can check the setting of the function.
p After checking, press .