Foma P702i, Manual

Page: 169 / 478

166
Saf
ety Set
tings
C
a
ll
Sett
in
g
w/
o I
D
You can set whether to receive (accept) or not to receive (reject) a call (or PushTalk call) depending on the
reason for no caller ID. There are three reasons; “Not supported”, “Payphone”, and “User unset”.
1
Lock/Security Call setting w/o ID
Enter your Terminal Security Code
Not supported . . . . .Calls from the other party who cannot notify his/her phone number such as calls from overseas or
from ordinary phones via call forwarding services.
(However, the caller ID might be notified depending on the telephone companies the calls go
through.)
Payphone . . . . . . . . .Calls from payphones, etc.
User unset . . . . . . . .When the caller has set the caller ID not to be notified.
2
Accept or Reject
p If you select “Accept”, go to step 2 on page 128 to select a ring tone or i-motion movie. If you select “Same as ring tone”, the ring
tone will be the one selected in “Phone” of “Select ring tone”.
1
Incoming call Ring time Do the following operations.
Call Setting w/o ID
Setting Response to Incoming Calls without Caller ID
Setting at purchase
Not supported: Accept/Same as ring tone Payphone: Accept/Same as ring tone
User unset: Accept/Same as ring tone
< >
Information
p If you select “Reject”, the ring tone does not sound even if a call comes in, the call is stored in “Missed calls” of “Received calls” and the
icon of “Missed call” appears on the Stand-by display. Also, the caller hears a busy tone even if you have set Voice Mail Service or Call
Forwarding Service to “Activate”. However, if you set the ring time for Voice Mail Service or Call Forwarding Service to 0 seconds, or
when the FOMA phone is out of the service area, or when the power is turned off, the busy tone will not be played, activating Voice Mail
Service or Call Forwarding Service. Note that in this case the record is not stored in “Received calls”, and the “Missed call” icon does
not appear on the Stand-by display.
p You can receive SMS messages or i-mode mail regardless of this setting.
Ring Time
Muting Ringing just after Receiving
< >
Item Operations
Ring start time You can specify the mute time before ringing starts, for when a call (or PushTalk call) comes in from the
party whose phone number is not stored in the Phonebook. This function is effective as a
countermeasure for blocking nuisance calls such as one ring phone scam (one-giri).
ON or OFF
p If you select “OFF”, the setting is completed.
Enter a start time (seconds)
p Enter from “01” through “99” in two digits.
p Not to change the specified start time, do not enter a start time; just press .
Missed calls display You can set whether to display the call disconnected within the time specified for “Ring start time” in
Received Calls.
Display or Not display
Setting at purchase
Ring start time: OFF
Start time: One second (when
“Ring start time” is set to
“ON”)
Setting at purchase
Display