Foma P702i, Manual

Page: 94 / 478

91
Making/
Receivi
ng Vid
e
o-ph
one Call
s
Hands-fr
e
e wi
th
Video-phon
e
You can set whether to switch to Hands-free automatically for when a video-phone call starts.
1
Videophone Hands-free w/ V.phone ON or OFF
p See page 64 for how Hands-free works while Hands-free is activated and how to switch to Hands-free during a call.
You can set the quality of the other party’s image on the display and of your image to be sent.
1
Videophone Visual preference Select an image quality
p
Select “Visual preference” of “V.phone settings” from the Function menu by pressing ( ) during a video-phone call.
The setting here is effective only for the current video-phone call.
1
Videophone Send camera image ON or OFF
p If you select “OFF”, the substitute image is sent to the other party.
Backlight You can select whether to light the display constantly or light for about 15 seconds after an operation.
Constant light or 15 seconds light
Photo light You can set Photo Light to light for when sending the image through the outside camera to the other
party.
ON or OFF
Call time disp. You can select whether to display the call duration during a video-phone call. (See page 335)
Outside camera/
Inside camera
You can switch the cameras. (See page 88)
Send DTMF tone/
DTMF tone OFF
During a Chara-den call, you can switch to the DTMF transmission mode that enables you to enter the
data from the numeric keys and to send DTMF (touch-tone signals). You can set it only during a
Chara-den call.
p “Send DTMF tone” is displayed when the mode is not the DTMF transmission mode and “DTMF tone
OFF” is displayed in the DTMF transmission mode.
p You can operate this only during a Chara-den call.
p In the DTMF transmission mode, you cannot operate a Chara-den image in the Whole Action and
Parts Action mode.
p
The DTMF tone may not be received depending on the device of a receiving end.
Own number You can display your phone number (own number).
Hands-free with Video-phone
Setting Video-phone Hands-free
Setting at purchase ON
Function menu Operations
Setting at purchase
Constant light
At video-phone start-up
OFF
< >
Visual Preference
Setting Image Quality for Video-phone Calls
Setting at purchase Normal
< >
Information
p
“Prefer motion spd” is effective for moving images. When there is little motion, the quality becomes better if you set to “Prefer img qual”.
p If the radio wave conditions weaken during a video-phone call, the image may appear like a mosaic.
Send Camera Image
Turning Camera On/Off Automatically when Making a Video-phone Call
Setting at purchase ON
< >