Foma P702i, Manual

Page: 419 / 478

416
App
e
nd
ix/Extern
a
l Device Li
nkage/
Troub
leshooting
Scanni
ng Function
Regarding data and programs downloaded or obtained from sites or i-mode mail messages to the FOMA
phone, you can detect data that might cause trouble, can delete it, and can stop launching an application
program.
p
Use the pattern data for checking. Update the pattern data, because it is updated each time new trouble is found. (See page 416)
p
The scan function is for filtering out the data that causes troubles to mobile phones at the time of browsing web pages or
receiving messages. Note that this function works only when the pattern data for each trouble has been downloaded to your
mobile phone and when the pattern data for each trouble is found.
p The data contained in the pattern data vary depending on the mobile phone model. Therefore, note that we may stop distributing
the pattern data to mobile phones that have been on the market for three years or more.
If you set the scan function to “ON”, data or program is automatically checked when you try to run it.
1
Lock/Security Scanning function Set scan
2
ON or OFF YES
p
When the scan function is set, an alert is shown by five levels if data that might cause trouble is detected. (See page 418)
You can update the pattern data.
1
Lock/Security Scanning function Update YES
YES
Scanning Function
Protecting the FOMA Phone from Data Causing Trouble
First of all, update the pattern data to make it the latest.
Setting Scanning Function <Set Scan>
Setting at purchase ON
< >
Information
p You cannot set this function while another function is working.
Updating Pattern Data <Update>