Foma P702i, Manual

Page: 170 / 478

167
Safe
ty Sett
ings
Reject Unknown
You can reject calls (or PushTalk calls) from anyone whose phone number is not stored in the Phonebook.
This function is valid only when the other party notifies his/her phone number. It is advisable to activate
“Caller ID request” and “Call setting w/o ID” simultaneously.
1
Lock/Security Reject unknown Enter your Terminal Security Code
Accept or Reject
Information
p With the ringing operations, the ring tone sounds, vibrator vibrates, and Call/Charging indicator lights or flickers.
p When a call comes in from the party whose phone number is stored in the Phonebook, the FOMA phone starts ringing as soon as the
call comes in even if “186/184” is added to the phone number. However, during PIM Lock, or for the call from the party whose phone
number is stored as secret, ringing starts according to the setting of this function.
p If the ring start time is longer than the ring time for Record Message, the ringing operations do not start, activating Record Message
instead. To activate Record Message after starting the ringing operations, set the longer ring time for Record Message than the ring
start time. The same applies to the ring time for Voice Mail Service, Call Forwarding Service, and Automatic Answer.
p
You cannot set “Ring start time” to “ON” while “Reject unknown” is set to “Reject”.
Reject Unknown
Rejecting Calls from Parties whose Phone Numbers are not Stored in
Phonebooks
Setting at purchase Accept
< >
Information
p During PIM Lock or if a call comes in from the party whose phone number is stored as secret, the call is not rejected, regardless of this
setting.
p
If you simultaneously activate “Reject unknown” and “Call acceptation” of “Restrictions”, the latter has priority.
p
When a call comes in from anyone whose phone number is not stored in the Phonebook while you set this function to “Reject”, it is
stored in “Missed calls” of “Received calls”, and the Notification icon of “Missed call” appears on the Stand-by display. Also, the caller
hears a busy tone even if you have set Voice Mail Service or Call Forwarding Service to “Activate”. However, if you set the ring time for
Voice Mail Service or Call Forwarding Service to 0 seconds, or when the FOMA phone is out of the service area, or when the power is
turned off, the caller does not hear a busy tone, and Voice Mail Service or Call Forwarding Service works. Note that in this case the
record is not stored in “Received calls”, and the Notification icon of “Missed call” does not appear on the Stand-by display.
p
When this function is set to “Reject” and each setting of “Call setting w/o ID” is set to “Accept”, calls from “Not supported”, “Payphone”,
or “User unset” are received.
p You can receive SMS messages or i-mode mail regardless of this setting.
p You cannot set “Reject unknown” to “Reject” while “Ring start time” of “Ring time” is set to “ON”.