395
A
ppendix/
External Devi
ce
L
inkage/Tro
ubleshooti
ng
Error Message
s
Error Messages
Message
Description
Reference
Abnormal end
An error occurred, so scanning could not be done.
–
Activate ring time 001
䌾
120 sec
Set a ring time for Automatic Answer to 1 through 120 seconds.
P.339
Activate ring time 01
䌾
30 sec
Set a ring time for “Mail/Msg. ring time” to 1 through 30 seconds.
P.133
Activating
Receive Option Setting is set to “OFF”. Switch the setting to “ON” and try again.
P.240
Activating camera failed
An error occurred, so the camera could not start up.
–
Activating EASY mode
Cannot operate
Switch to Normal mode and try again.
P.32
Activating keypad dial lock
Keypad Dial Lock is activated. Release Keypad Dial Lock and try again.
P.161
Activating mail security
Cannot download
Mail Security is activated, so you cannot download. Deactivate Mail Security and try
again.
P.164, P.248
Activating PIM lock
PIM Lock is set. Release PIM Lock and try again.
P.160
Activating PIM lock
Send original substitute image
During PIM Lock, a “Pre-installed” substitute image is sent.
–
Activating record display OFF
Record Display Set is set to “OFF”. Switch the setting to “ON” and try again.
P.162
Activating reject unknown
“Reject unknown” is set to “Reject”. Set to “Accept” and try again.
P.167
Activating restrict dialing
Restrict Dialing has been set. Release Restrict Dialing and try again.
P.165
Activating ring time
“Ring time” is set to “ON”. Set to “OFF” and try again.
P.166
Activating self mode
Self Mode is set. Release Self Mode and try again.
P.159
Additional number1 denied
You have not contracted for additional number, so you cannot use it. Subscribe to
the service and try again.
Back page
Additional number2 denied
Address is not valid (451)
You could not send the message correctly. Check the address and try again.
P.229, P.261,
P.263
All protected
Cannot delete
All data items are protected, so you cannot delete. Release the protection and try
again.
P.212, P.219,
P.249
Already downloaded
Software with the same version has already been downloaded.
–
Already read
All received mail messages are read.
–
Already saved
The same data has already been saved.
–
Already set
Already has been pasted to the desktop. Check from the Stand-by display.
P.148
Already has been set, so you cannot set.
–
Already has been stored, so you cannot store.
–
i-
α
ppli auto-start has already been set to the same time. Set the different time for
each i-
α
ppli program.
P.276
Already stored at same time
The alarm has already been set to the same time. Set the different time for each
alarm.
P.326
An error has occurred while
launching
You could not launch during PushTalk communication.
–
Attached file is deleted
The attached file is deleted when you quote and reply to the message with a file
attached.
–
Authentication of PIN1 code failed
Three times erroneous entry of the PIN1 code blocks the code. Enter the PUK (PIN
unblock code).
P.156
Authentication of PIN2 code failed
Three times erroneous entry of the PIN2 code blocks the code. Enter the PUK (PIN
unblock code).
P.156
Authentication type is not supported
(401)
Incompatible authentication type, so you cannot connect.
–
Auto start already 3 software set
Three software programs that can be auto-launched have already been set.
Cancel the software programs and try again.
P.276
Bar code reader
Cannot operate
An error occurred, so you could not start Bar Code Reader.
–
Battery is low
Cannot start
The battery level goes short, so you cannot start. Charge the battery and try again.
P.44
Battery is low
Cannot turn on the light
The battery level goes short, so you cannot turn on the light. Charge the battery and
try again.
P.44
Summary of Contents for P702i
