Installation Instructions
22.3.11
Panda_AGT-DC_5000_12V_s01285_Operation manual.R03 - Chapter 5: Installation Instructions Page 69
5.5.2 Exhaust / water separator
The exhaust/water separator
In order to reduce the noise level of the generator unit to a minimum, an optional exhaust outlet
muffler mounted next to the thru-hull fitting can be installed. Additionally there is component at
Fischer Panda, which exercise both functions of a "exhaust goose neck", and the water separa-
tion. With this "exhaust/water separator" the cooling water is derived over a separate pipe. The-
reby the exhaust noises at the exterior of the yacht are strongly decreased. Particularly the "water
plash" allocate.
The water flow on the exhaust/water
separator unit has an inner diameter (ID)
of 30mm. If the path from the water sepa-
rator to the raw water outlet is very short,
the hose can be further reduced to 1"
(25mm) ID.
Fig. 5.5.2-1: Exhaust/water separator
1. Raw water outlet ø 30mm
2. Hose connector ø 30mm
3. Reducer 30/20mm (if required)
4. Hose
5. Hose connector
6. Sea cock
7. Hull outlet
8. Hose clips
Fig. 5.5.2-2: Exhaust/water separator
