The Panda Generator
Page 40 Panda_AGT-DC_5000_12V_s01285_Operation manual.R03 - Chapter 4: The Panda Generator
22.3.11
Cooling water injection
A.) To the thermostat housing
B.) From the external expansion tank
The intake pipe from the external cooling
water expansion tank is connected to the
point shown with „B“.
Fig. 4.3.2-6: Cooling water injection
Internal cooling water pump
The diesel motor cooling water pump (see
arrow) aids the circulation of the internal
freshwater system.
Fig. 4.3.2-7: Internal cooling water pump
Ventilation screw cooling water pump
The ventilation screw above the cooling
water pump casing may not be opened,
whilst the generator is running. If this
occurs by mistake, air will be drawn
through the opening. Extensive ventilation
of the whole system is then necessary.
Fig. 4.3.2-8: Ventilation screw cooling water pump
A
B
