Composants Mobilis Elite
Rigid trolleys
The collector trolley shunts the electrical current in the Mobilis line to the mobile device requiring power.
Description
The rigid trolley is designed to shunt the electrical current in standard installations (no curve) operating at speeds up to 100m/min.
It is not intended to support a load. It is inserted into the line by matching poles using a system of safety pins. The mechanical link
between the trolley and the mobile device is ensured by the carrier. The self-lubricating carbon brushes, mounted on springs,
thereby guaranteeing a permanent contact with the conductor. The trolley is available in 3 versions: - Two versions with a box,
without cable,
cable gland M25, allowing connection via flexible copper cables of 2.5 mm² to 6 mm², Ø13 to 19 mm, of Class 5
minimum only, one with a pole identified for earth (standard version), the other without earth location with poles L1 to L5. Third
version prewired with earth pole, with cable H07-RNF (4 X 4 mm² or 5 X 4 mm² or 6 mm²). The prewired trolley can be delivered
with a cable length of 1m (standard), or more (on request). The carbon brush (or brushes) are the parts of the Mobilis Elite trolley
most subject to wear. They can be easily replaced without intervention on wiring. A simple screwdriver is all that is needed. The
maximum wear tolerance is etched on the body of the trolley. The single trolley can shunt up to 40 A when travelling. For higher
intensities, building a set of 2 to 3 collector trolleys (double collector, triple collector) can respectively shunt up to 80 A and up to
120
A.
In
installations
with
dust-protecting
lips,
only
single
trolleys
should
be
used.
Categorie
Standard
Avantage n°1
Access to connection plate without taking trolley out
Avantage n°2
Available in version with/and without cable
Références et compatibilités
Références et variantes
Rigid trolley up to 100m/min. For the simplified trolleys, high speed, articulated for curves, cleaners and special transfer, refer to
the
related
items.
For
versions
with
box
outlet
without
earth
marking,
add
-
B
after
the
reference.
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 97/223