Données techniques
Données techniques
Element with connection system fitted with built-in self-breaking screws, guaranteeing tightening at optimum torque. 'Floating'
conductors fitted to manage the differences in expansion with the PVC line. The protection conductor is identified by a green-yellow
band over the entire length of the element. Caution: H.T. line cannot be fitted with dust-protecting lips, since the lip seal material is
not
appropriate
for
temperatures
above
55°C.
Encombrement L x H x Z
64 x 90 x
Poids
According to reference
Tension d'emploi
440VAC
Température d'utilisation
-30°C to +75°C
Calibre
12A, 20A, 40A, 60A, 100A, 130A, 160A, 200A
Matière
Self-extinguishing PVC white
Montage
Outils nécessaires au montage
Outils nécessaires au démontage
Règle d'installation 1
Elements to be clipped in sliding hangers, end to end connection of elements by tightening the connections. For lengths above 140
meters, or when curves, transfer elements, or rigid power cables are fitted, please refer to the section 'Expansion joints' to
determine if an expansion joint is required. Position the elements at a distance from the support large enough to provide access to
the connections and to position the accessories (covering flange, feed box): minimum recommended clearance of 65mm.
Règle de montage 1
1. Insert the lines in the sliding hangers, 2. Connect the lines
Règle de montage 2
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 35/223