Composants Mobilis Movit
Cleaning and grindding brushes
Renovates the surface condition of the tracks.
Description
Maintenance accessory used for restoring the surface condition of the tracks, do not use a cleaning collector when the installation
includes
a
double
collector
400A
or
a
simple
collector
60A.
Categorie
Accessories
Avantage n°1
Installed in place of brush
Avantage n°2
Allows periodic cleaning of the tracks
Références et compatibilités
Références et variantes
Cleaning brush Ref. MC8005, grinding brush Ref. MC8006
Données techniques
Données techniques
Cleaning brush with abrasive foam and grinding brush with fine grit of 120
Montage
Règle d'installation 1
Do not connect a cable to these brushes
Règle de montage 1
Replace the brush after mains voltage cut off
Maintenance
Simple collectors: fit the cleaning collector in opposite position and clean the rails one by one. Double collectors: replace a collector
brush by a maintenance brush, fix the cable to one of the maintenance brushes. Run the cleaning brushes back and forth several
times (with abrasive foam) to remove all solid dust particles and deposits, then repeat the operation with the grinding brushes
(abrasive grit No. 120) to improve the surface condition of the tracks. Once the lines have been cleaned up, the collector brush
must
be
put
back
on
as
this
system
is
not
designed
to
run
over
long
distances.
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 209/223