Composants Mobilis Movit
Collector
Ensures the electrical connection between the mobile device and the rails.
Description
The collectors shunt the electrical current to the mobile device requiring power by friction of a carbon brush on the rail track. They
shall be installed on a collector bracket that is fixed to the mobile device requiring power. The single-pole 60A model has to be
installed in a head to tail position on its support to shunt 120A. 200A model, 400A pre-mounted model, also available. One collector
or a set of collectors is required per pole. The earth collector differs from the phase collectors as it has green-yellow markings and a
mechanical safety pin to prohibit any contact on a phase, thereby ensuring the safety of the operators. The safety pins can be
moved to fit the direction of assembling chosen by the installer. All collectors are delivered with 2-meter flexible cable. The head of
the collector is articulated within 2 axes to maintain contact in the varying positions of the collector bracket on which the collectors
are mounted. The round shape of the contact track allows to maintain contact even when the collector has a cross slope. The
brushes
can
be
replaced
when
worn
out.
Categorie
Standard
Avantage n°1
High speed
Avantage n°2
Optimized contact
Références et compatibilités
Références et variantes
The ordering references are as follows. Please note that the earth collector shall be doubled as required by Standard EN60204-32
§13.8.2.
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 186/223