Montage
Outils nécessaires au montage
Outils nécessaires au démontage
Règle d'installation 1
Use a flexible cable for connection or provide a free-standing loop large enough to allow for line expansion. Providing one or more
feeding point in line rather than end-of-line reduces the voltage drop (?U = Lt.?3.Z.I) and allows to choose a lower intensity because
the length 'Lt' taken into account in the calculation varies according to the number of feed boxes. Providing a feeding point midway
in the line reduces by half the voltage drop, as the 'Lt' section taken into account equals half the length of the line. For more than
one feeding point in line, please review the following graph for the required position of the points and related voltage drops.
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 172/223