Disponible en version courbe ?
oui
Données techniques
Données techniques
Element with connection system fitted with built-in self-breaking screws, guaranteeing tightening at optimum torque. 'Floating'
conductors fitted to manage the differences in expansion with the PVC line. The protection conductor is identified by a green-yellow
band
over
the
entire
length
of
the
element.
Encombrement L x H x Z
64 x 90 x
Poids
According to reference
Tension d'emploi
750V
Température d'utilisation
-30°C to +55°C
Calibre
12A, 20A, 40A, 60A, 100A, 130A, 160A, 200A
Matière
Self-extinguishing PVC light grey
Fichier 3D à télécharger
http://catalogue.fels.fr/medias/produits/Gaine_2010_06.7z
Fichier 2D d'implantation face
http://catalogue.fels.fr/medias/produits/Gaine_face_DXF.7z
Fichier 2D d'implantation profil
http://catalogue.fels.fr/medias/produits/Gaine_profile_DXF.7z
Fichier 2D d'implantation dessus
http://catalogue.fels.fr/medias/produits/Gaine_top_DXF.7z
Montage
Outils nécessaires au montage
Outils nécessaires au démontage
Règle d'installation 1
Elements to be clipped in sliding hangers, end to end connection of elements by tightening the connections. For lengths above 140
meters, or when curves, transfer elements, or rigid power cables are fitted, please refer to the section 'Expansion joints' to
determine if an expansion joint is required.Position the elements at a distance from support large enough to provide access to the
connections and to position the accessories (covering flange, feed box): minimum recommended clearance of 65mm.
Règle de montage 1
1. Insert the lines in the sliding hangers, 2. Connect the lines
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 32/223