Composants Mobilis Movit
Replacement brush for collector
Replacement brush for collector 60A and 200A.
Description
Allows
to
replace
the
collector
brush
when
its
lifetime
has
ended.
Brush
is
identical
to
the
new
brushes.
Categorie
Accessories
Avantage n°1
Cost-effective
Avantage n°2
Easy to fit
Références et compatibilités
Références et variantes
60A: reference MC0114, 200A: reference MC8041
Montage
Règle d'installation 1
Replacement of the brush: the base of the chamfer is the wear limit point.
Règle de montage 1
Replace the brush after mains voltage cut off! Collector 200A: Pull up the brush to remove it from the case of pantograph and
unfasten the bolted connection with the cable, Pay attention to the placement of the cable eye stiffener during reassembly!
Collector 60A: Loosen and remove the connection screw of the brush. Remove the brush, replace it, and proceed to the reverse
operation.
Maintenance
Replacement of the brush: the limit of wear is the base of the chamfer.
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 206/223