Données techniques
Données techniques
PVC line with connection system fitted with built-in self-breaking screws, guaranteeing tightening at optimum torque. Self-
extinguishing elastomer lips. Designed to limit ingress of dust in the line. Index of protection: IP23. The sections with lips must be
fitted with covering flanges or feed boxes appropriate to the lips. Caution: Use only simple single trolleys and carriers. The dust-
protecting lips are not appropriate for temperatures above 55°C. The protection conductor is identified by a green-yellow band over
the
entire
length
of
the
element.
Special
elements
are
also
available
with
dust-protecting
devices.
Encombrement L x H x Z
64 x 102 x
Poids
According to reference
Tension d'emploi
750V
Température d'utilisation
-20°C to +55°C
Calibre
12A, 20A, 40A, 60A, 100A, 130A, 160A, 200A
Matière
Self-extinguishing PVC light grey, black lips
Montage
Outils nécessaires au montage
Outils nécessaires au démontage
Règle d'installation 1
Elements to be clipped in sliding hangers, end to end connection of elements by tightening the connections. For lengths above 140
meters, or when curves, transfer elements, or rigid power cables are fitted, please refer to the section 'Expansion joints' to
determine if an expansion joint is required. Position the elements at a distance from the support large enough to provide access to
the connections and to position the accessories (covering flange, feed box): minimum recommended clearance of 65mm.
Règle de montage 1
1. Insert the lines in the sliding hangers, 2. Connect the lines
Règle de montage 2
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 42/223