Image d'installation
Règle de montage 1
To be positioned symmetrically opposite to the collector already in place an in relation to the collector bracket. 1. Unscrew the
support of the collector in place. Position the cleaning collector and screw 3. Perform the reverse operation for disassembling.
Maintenance
Simple collectors: fit the cleaning collector in opposite position and clean the rails one by one. Double collectors: replace a collector
brush by a maintenance brush, fix the cable to one of the maintenance brushes. Run the cleaning brushes back and forth several
times (with abrasive foam) to remove all solid dust particles and deposits, then repeat the operation with the grinding brushes
(abrasive grit No. 120) to improve the surface condition of the tracks. Once the lines have been cleaned up, the cleaning collector
must
be
removed
as
this
system
is
not
designed
to
run
over
long
distances.
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 208/223