Composants Mobilis Movit
Bracket
Ensures the mechanical link between the frame structure and the sliding hangers, fixes the position of the line in relation to the
running rail.
Description
The bracket sets the clearance between the line and the travel path. This clearance must be as parallel as possible. It carries the
sliding suspensions which are slipped into the lower groove and tightened through 2 openings for access. The bracket is available in
2 lengths, 590mm and 700mm. It is designed to fit to the lower part of the beams of a maximum width of 300mm, by tightening 2
lugs. The offset must be adjusted in relation to the running rail. Taking into account the possible load on the supporting elements
(weight of the rails + heating cable + unusual loads + white frost), the offset of the rails in relation with the beam should the
shortest
possible
to
reduce
stresses.
Categorie
Standard
Avantage n°1
Available for beam wings of thickness 6 to 32mm
Avantage n°2
2 lengths available
Références et compatibilités
Références et variantes
The following references are available.
Références et variantes
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 194/223