Composants Mobilis Movit
Sliding hanger
Supports the rails, provides the interval between rails.
Description
The suspensions are groups of items of 1 to 8 poles, fully pre-mounted in factory. They are ready for installation. They allow for rail
sliding (expansion-retraction phases). Each suspension comprises:- anodized aluminum support of suspension. - thermoplastic parts
of suspension depending on the number of poles. - 2 M8 pins which allows fixing on a support. The plastic fixing parts have bent
wings to limit the surface of contact with the rail envelope. This limits the retention of water, thereby reducing the strength of
sticking between the suspension and the rail due to the white frost or the ice. The suspensions are sized to support the elements of
the heaviest rails, fitted with de-icing cable, or the extra stress due to the white frost or to an extra load made by an installer.
Categorie
Standard
Avantage n°1
Self-alignment system
Avantage n°2
Centre to centre clearance of 50mm between conductors
Références et compatibilités
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 178/223