Image d'installation
Règle de montage 1
Align the transfer elements in both planes, within the limits of the following alignment tolerances: max. 3mm for short transfer
elements
and
max.
10mm
for
long
transfer
elements.
Adjust
if
need
be
to
get
the
trolley
run
smoothly.
Maintenance
The operating life of the transfer elements and trolleys will be longer if the transfer elements are well aligned and if the trolleys are
driven in the axis of the line. For a pair of transfer elements, the trolley should be replaced every 25,000 cycles through and back.
After the same number of cycles, or at least once a year, you should check: - the degree of electrical insulation. If necessary clean
the cone, after first disconnecting the installation from the mains. - the mechanical condition of the transfer elements and the
trolleys
(rollers,
brushes,
signs
of
wear
in
the
cones
etc.).
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 93/223