Données techniques
Données techniques
Please provide the following data: radius, angle, reference of the curve. Minimum radius: 800mm, for lower radii, please enquire.
Maximum radius: no limit. Angle: up to 120° per element for intensity 20A to 100A, up to 90° for intensities 130A to 200A, above
this, please enquire. The feeding line must maintain a constant distance from the travel path of the mobile device requiring current
and must therefore follow a parallel path. The special curved elements (in the horizontal plane) are designed for this type of
installation. Other features of the element: see section on straight elements. Maximum travel speed in the curves: 70m/min.
Poids
kg/m identique au standard, selon la longueur développée
Tension d'emploi
750V ou 440V selon gamme choisie
Température d'utilisation
-20°C to +55°C
Calibre
20A, 40A, 60A, 100A, 130A, 160A, 200A
Matière
Gray PVC and self-extinguishing thermoplastic
Montage
Outils nécessaires au montage
Outils nécessaires au démontage
Règle d'installation 1
ASSEMBLING: When assembling, scrupulously follow the specifications in the assembly instructions for curved elements SPMO 064.
The curve must not move in the sliding hangers and shall be regarded as a fixed point. Always use fixed hangers to support it,
quantities to be defined according to the 2 following rules: RULE 1: If the expanded length of the curve is equal to or below 2m AND
if the angle of the curve is equal to or below 90°, provide 2 fixed hangers per curve. RULE 2: If the expanded length of the curve is
above 2 m OR if the angle of the curve is above 90°, provide 3 fixed hangers per curve. ACCESSORIES: At each end of the curves,
use special covering flanges for curves ME2000-CO, or special feed boxes for curves ME1300-CO, ME1330-CO ME1332-CO or
ME1329-CO. It is imperative to always use articulated trolleys in all installations with curve, whatever the radius. EXPANSION
JOINTS: When a straight line section is located between 2 curves, provide an expansion joint for lines with length above the values
below.
Image d'installation
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 88/223