Maximum intensity in continuous operation, or failing this power and types of receivers (cage
or slip-ring motors, electronic starters, resistors)
Receiver start-up intensity
Maximum ambient temperature
Maximum clearance between a receiver and the nearest feeding point
Permissible voltage and voltage drop in continuous operation and on start-up
Type of current (frequency, voltage)
Running cycle of the receiver (duty cycle, or operating time per 10-minute cycle).
In addition, review the following options to find out the most appropriate solution:
Installation with more than 5 conductors: select Mobilis Movit or arrange 2 Elite lines in parallel
Installations with curves and a radius shorter than 15m, or transfers between different circuits:
select Mobilis Elite
Installations with mobile speed greater than 180m/min: choose Mobilis Movit
For all other configurations, calculate intensity to select the best equipment.
All the above features along with the calculation of intensity (see below) will help you determine
which range is most appropriate to your needs, Elite 12A-200A Range or Movit 315A-630A Range,
The first selection criteria to be considered being the permissible current for Mobilis rails, which
must be higher than the installation intensity, and the second criteria being the voltage drop
involved.
You may also use the Online Calculation Tool on our website:
www.fels.fr
The details above can also be used to fill out the online
Consultation Sheet
for assistance by our
Engineering Office.
3. TECHNICAL DETAILS:
See
Technical data of Elite Range
See
Technical data of Movit Range
4. LINE CALCULATION:
See the section
Line calculation
5.
OBSOLETE EQUIPMENT
See the section
Historical ranges
6.
GUARANTEE
Our equipment is guaranteed one year against any material or manufacturing defect recognized by
ourselves. As we are not responsible for its installation and operation, our guarantee covers only
replacement or repair (at our own choosing) of the part recognized to be defective.
We do not accept responsibility for any defects arising from faulty supervision or maintenance. We
also disclaim liability for any production stoppages that may result. Any arbitration shall be held in
Strasbourg, even when several defendants are involved.
Selection of product
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 9/223