Composants Mobilis Movit
Feeding box
Interface accessory for the electrical connection of one pole of the line at a junction in-line.
Description
The purpose of the feed boxes is to carry out the electrical connection of the rails with the electrical installation. They are linked up
to a connection in place of a covering flange, and ensure the protection of the operators against direct contact with live parts, as do
covering flanges. Their position in the line is determined by the calculation of voltage drops. Each pole shall have its own feed box.
A single model of feed box is used for all intensities. A feed box includes: - a common base. - 2 half-lids support each a M32 cable
gland. - a self-stick label of identification of the poles. Connection shall be made by 1 or 2 flexible cables, type HO7 RNF, equipped
with cable eye stiffeners to be crimped with connection Ø10 suitable to the connection screws. We can provide the cable eye
stiffeners for cables 50, 70 and 95 mm². The cable glands are suitable for cables of diameter 15 to 25 mm (type HO7RNF 35 mm²
up
to
HO7RNF
120
mm²).The
feed
boxes
are
delivered
fully
pre-mounted.
Categorie
Standard
Avantage n°1
Introduction by 2 M32 cable glands closed by caps
Avantage n°2
Closing of box without tool
Références et compatibilités
Références et variantes
MC2300
Données techniques
Données techniques
M32 cable glands for cables Ø 15 to 25. Connection by 1 or 2 cable eye stiffeners with hole Ø10, each one on a separate screw.
Maximum
intensity
by
cable
eye
stiffener:
315A.
Encombrement L x H x Z
50 x 120 x 290
Poids
0,36 kg
Tension d'emploi
750V
Température d'utilisation
-30°C to +55°C
Calibre
315A, 450A, 630A
Matière
Self-extinguishing thermoplastic
www.fels.fr
|
T +33(0)3 88 67 10 60
|
F +33 (0)3 88 55 01 79
|
Edité le 04/01/2017
Page 171/223