FDI P2131, Technical Manual, Page: 88 / 161

4.2 Special Tools and Materials Required for Maintenance
The P2131 is specifically designed using components with standard sizing, allowing the system
to be maintained and repaired using tools that are common to most maintenance technicians.
These items are assumed to be readily available.
Only a few items would be considered necessary for maintaining this equipment that may be
less readily available. These unique items are listed below.
1. Wrench, Torque (3/8” Square Drive, capable up to 150 inch ‐ lbs.),
(P/N: P2131 ‐ 1 ‐ 9015)
2. Grease, High Temperature (275°F), NLGI #2,
(P/N: P2131 ‐ 1 ‐ 9016)
3. Bleach, Chlorine, 3 ‐ 6% Solution,
(P/N: P2131 ‐ 2 ‐ 9004)
4. Mallet, Soft,
(P/N: P2131 ‐ 1 ‐ 9020)
5. Gloves, Heat Resistant,
(P/N: P2131 ‐ 1 ‐ 9017)
6. Brush. Long, Thin Bottle ‐ type,
(P/N: P2131 ‐ 1 ‐ 9018)
7. Wrench, 11/16” Flare Nut,
(P/N: P2131 ‐ 1 ‐ 9021)
8. Pigtail, WRS Power Cord,
(P/N: P2131 ‐ 2 ‐ 4016) NOTE: This is optional and allows the WRS to be setup to the side of
the SMU for troubleshooting.
82