FDI P2131, Technical Manual, Page: 50 / 161

The “Log” screen will be displayed at the end of the cycle showing the results of the cycle.
A total of 40 previous “Log” entries can be viewed using the LEFT and RIGHT arrows. The
“Log” screen can also be accessed from the “Main Menu.”
3.3.4 RUNNING A PERFORMANCE TEST:
1. On the “Main Menu” screen, choose “TESTS”.
2. On the “Performance Tests” screen, choose either “BOWIE ‐ DICK TEST” or “VACUUM
LEAK TEST.”
For a BOWIE ‐ DICK TEST:
Place a U.S. Food and Drug Administration (FDA) ‐ approved BOWIE ‐ DICK test pack
on the bottom rack near the drain in the chamber. Follow all test pack
manufacturer’s recommended procedures. For example, a warmup cycle (e.g.,
IUSS 4/0) should always be run prior to the BOWIE ‐ DICK test.
WARNING: A BOWIE ‐ DICK test should be performed each day to ensure air removal is
functioning properly during pre ‐ vac. A BOWIE ‐ DICK test should also be performed
any time the sterilizer is set up at a new location or after maintenance work.
44