FDI P2131, Technical Manual, Page: 87 / 161

4.1.5 Post ‐ Maintenance Checklist
(After any intrusive service work)
CHECK TASK
1. The unit is tilted for correct condensate drainage. Ensure the
back of the unit is 1” higher than the front (approx. 4 shims).
2. All hoses are connected.
3. All electrical cables are connected.
4. No loose parts or tools in the electrical panels.
5. All panels are reinstalled.
6. The water levels in the SMU and the WRS are both at the HIGH
marks.
7. The jacket vent valve, chamber vent valve, and both drain valves
are closed firmly.
8. The WRS is turned ON.
9. All accessories are accounted for in the SAB and the SAB is
properly stored.
10. All shelves are in place.
11. All alarms, repairs, and cycle count (found in “STATUS” screen)
are documented.
12. During a cycle, there are no steam leaks or water leaks.
13. Cycle times are normal.
14. Chamber vents correctly.
15. Follow all applicable requirements in AAMI ST79 for post ‐
maintenance performance qualification (e.g. IUSS warmup,
Vacuum Leak Test, three successful Bowie Dick Tests).
81