FDI P2131, Technical Manual, Page: 45 / 161

Rear View of SWS
Function(s) of Control or Indicator (Rear View of SWS)
ITEM CONTROL/INDICATOR FUNCTION
1.
Suction Line to
Manual Hand Pump
Used when manual hand pump is in service. Water flows
from bucket or Jerry can through hand pump and into
SWS.
2. Manual Hand Pump
If a pressurized potable water supply is not available,
pump potable water from bucket or Jerry can by rotating
handle clockwise. Flow rate up to 8 gpm. Turn handle
inwards for transport to prevent breakage.
3.
Discharge Line to Inlet
of SWS
Carries water from hand pump to SWS inlet connection.
4. Suction Strainer
Used when hand pump is in service. Strains out any
potential debris from Jerry can or bucket from water
before entering SWS.
5. Spanner Wrench
Used to remove Top Cap from blue housing and replace
the DI Cartridge.
1. Suction Line to
Manual Hand Pump
(P/N: P2131 ‐ 3 ‐ 3007)
2. Manual Hand Pump
(P/N: P2131 ‐ 3 ‐ 0003)
3. Discharge Line to
Inlet of SWS
(P/N: P2131 ‐ 3 ‐ 3008)
4. Suction Strainer
(P/N: P2131 ‐ 3 ‐ 3009)
Panel Fasteners
5. Spanner Wrench
(P/N: P2131 ‐ 3 ‐ 1012)
39