Fagor 8055i FL EN, Operating Manual

Page: 114 / 160

·114·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Dril
lin
g
a
nd center pun
ching
o
peratio
ns
3.12 Drilling and center punching operations
Center punching operation.
The following data must be defined:
• The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part
surface (Z), the dwell at the bottom (t) and the type of center punching.
Drilling operation (level 1).
The following data must be defined:
• The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part
surface (Z), the total machining depth (P), the drilling peck (I) and the dwell at the bottom (t).
Drilling operation (level 2).
It may be used to set the withdrawal distance (B) after each penetration.
This key accesses the drilling, center punching and bore milling operations.