Fagor 8055i FL EN, Operating Manual

Page: 74 / 160

·74·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Op
eration
ed
iting
mod
e
3.1.1 Definition of machining conditions
Some operations keep the machining conditions throughout the execution (boring, reaming, etc.).
Other operations use some machining conditions for roughing and others for finishing (pockets,
bosses, etc.).
This section describes how to define all this data.
Selecting the roughing operation.
Place the cursor on the roughing checkbox, select or de-select the roughing operation pressing the
[TWO-COLOR] key and press [ENTER]. When de-selecting the roughing, all its data will stay in gray.
The data for finishing "side stock" and "depth stock" is turned on/off using the roughing checkbox
Selecting the finishing operation.
Place the cursor on the finishing checkbox, select or de-select the finishing operation pressing the
[TWO-COLOR] key and press [ENTER]. When de-selecting the finishing, all its data will stay in gray.
Axis feedrate (F).
Spindle turning speed (S).
Spindle turning direction
Machining tool (T).
Place the cursor over this data, key in the desired value and press [ENTER].
Press [ESC] to quit the tool calibration mode and return to the cycle
Coolant.
There are two ways to turn the coolant on or off.
Once the operation or the cycle is completed or the part-program it belongs to, the CNC outputs
the M9 function to the PLC.
Roughing pass (

).
Finishing stocks (

,

z).
Place the cursor over this data, key in the desired value and press [ENTER].
Place the cursor over this data, key in the desired value and press [ENTER].
Place the cursor on this data and press the two-color key.
It is also possible to access the tool calibration mode to check or modify the data for the
selected tool. To do that, place the cursor on the "T" and press the key associated with
tool calibration.
Place the cursor on this data and press the two-color key to change the icon.
Turns the coolant on. The CNC outputs the M8 function to the PLC.
Turns the coolant off. The CNC outputs the M9 function to the PLC.
Place the cursor over this data, key in the desired value and press [ENTER].
Place the cursor over this data, key in the desired value and press [ENTER].
*