Fagor 8055i FL EN, Operating Manual

Page: 109 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·109·
Ta
pp
in
g op
e
ra
ti
o
n
3.11 Tapping operation
Threading operation (level 1).
The following data must be defined:
• The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part
surface (Z), the total machining depth (P) and the dwell at the bottom (t) and the type of tapping.
Thread milling operation (level 2).
The following data must be defined:
• The type of threading (inside or outside), the machining point (X,Y), the coordinate of the safety
plane (Zs), the part surface coordinate (Z), the total machining depth (P), the nominal diameter
of the thread (

), the depth of the thread (K), the thread pitch (B), the approach distance to the
thread start point (Ds), the thread entry angle (

), the thread machining direction, the type of
tool to use and the number of cutter edges (N).
This key accesses the threading and thread milling operations.
Inside thread milling Outside thread milling

Zs
P
B
K



Zs
P
B
K
